 General Accessories
SA552 Extension Table – New!
The SA552 Extension Table is compatible with the NS40 and NS80.
 Accessory Feet
enlarge image SA110 Cording Foot for 7mm horizontal mach.
Used for embellishing with 1-3 cords. Cords or yarn are held by a clip on the top of the foot. Simply insert cords under the clip and stitch down using a serpentine zig zag or other decorative stitch. Great for couching! . Similar in use to SA157 & SA158
enlarge image SA114 Non-Stick Foot (horizontal bobbins)
This non-stick foot glides over difficult fabric surfaces with ease, while improving stitch quality in many problem fabrics. Some fabrics may bind under metal feet often causing problems with a consistant feed resulting in poor stitch quality. The non stick foot overcomes problems with fabric such as loop and hook tapes, leather, and vinyl. Perfect for hemming plastic tablecloths!
enlarge image SA120 Gathering Foot for PS & PC series
The Gathering Foot can be used for lightly gathering fabric as well as attaching the gathered edge to a flat (ungathered) fabric, at the same time quickly and easily. The gathering foot will allow the sewer to gently ease or slightly gather fabric for various garment and home decorating applications.
enlarge image SA125 1/4" Quilting Foot
For quilt and patchwork piecing with 1/4" or 1/8" seam allowances. Using the center needle, straight stitch position, the right front edge of this foot provides a guide for creating even ¼-inch seams for quilts, doll clothes and heirloom sewing projects. When using the left side of the foot as a guide, an 1/8-inch seam is created.
enlarge image SA126 Narrow Hem Foot (7mm)
The unique design of this foot creates a flat narrow hem on lightweight fabrics. This foot looks similar to the picot foot from the top. However the groove under the foot is slightly wider and flatter to form and to create a beautiful narrow hem. Start sewing with a length of thread extended from the back. Stop, pull a piece of the top edge of the fabric through the turned part fo the foot and use the lenght of thread to grip as you start to sew and need to guide the thread through the foot.
enlarge image SA128 Concealed Zipper/Fastener Foot (Snap on Foot)
Concealed Zipper/Fastener Foot (Snap on Foot). For easy installation of concealed zippers.
enlarge image SA129 Clear Quilting Foot (Screw on Foot)
This foot is also called a darning foot and may be used as a free motion foot. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created. (Screw on Foot).
enlarge image SA132 Quilting Guide for Foot Holder
The adjustable guide can be used to sew parallel rows at preset even intervals. Slide straight bar into the hole of the presser foot ankle or walking foot (equipped with a mounting hole). The distance from the needle may be adjusted by sliding the guide from left to right.
enlarge image SA133 Blind Stitch Foot 5 or 7mm
Adjustable guide for creating blind hems on a variety of fabrics While designed for blind stitching, the foot works well for edge stitching, lace and fabric edge joining. This is a great tool for many embellishing as well as utility uses.
enlarge image SA140 Walking Foot
The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. The walking foot is great for quilting, sewing when matching prints or plaids or fabric drift is an issue . Brother offers several Walking feet which differ in the size of the feed dog, shank height etc. Please check your manual or the machine listings on this web site to find the correct walking foot to fit your machine. Walking Feet are not for use in reverse or side to side sewing as well as some built in stitches that include other than forward movement of the feed dogs.
enlarge image SA141 Braiding Foot up to 5mm width
The adjustable guide on this foot offers perfectly centered hands free placement of cords, ribbon, braiding, or tape up to 5mm in width.
enlarge image SA142 Fringe Foot
The Fringe foot is a good tool for creating 3-D flowers, heirloom seam joins, surface texture and custom trims with a simple zig zag stitch. This foot was originally designed and used to mark construction details by creating tailor tacking, so feel free to use it as a great marking too as well!
enlarge image SA143 Ruffler Foot for 7mm mach.
Ruffle and pleat like a pro. Create beautiful ruffles and pleats in varying depths and fullness with this adjustable ruffler. The new Brother ruffler makes fast work of creating ruffles, evenly spaced tucks, and gathers for home dec pillows and curtains. You can also create great trims with purchased ribbons. Single hole needle plate makes this foot perfect for ruffling lightweight fabrics as well!
enlarge image SA145 Clearview Foot for horizontal bobbin 7mm
The Clear-view foot can be used with any application where visibility of seams or pattern markings are desired for ease in embellishment as the foot is clear plastic. This foot is similar to SA147 except this foot has a clear bar in front of the needle. Perfect for quilting applique'!
enlarge image SA147 Clear Open Toe for horizontal bobbin 7mm
This foot is used with any application where visibility of seams, appliques, or pattern markings are desired for ease in embellishment as the foot is clear plastic. This foot is similar to SA145 except this foot has no bar in front of the needle.
enlarge image SA150 Pearl Sequins Foot
Pearls & Sequin foot is great for embellishing with threaded beads, sequins, or rounded cords up to 4 mm in size. Simply place your embellishment choice under the foot and into the guide tunnels andstitch down to your base fabric. Great for adding a little glitz with sequins or pearls as well as couching larger cords.
enlarge image SA157 5 Hole Cording Foot (up to 7mm)
Used for embellishing with 1-5 narrow cords. Simply thread your cords through the holes and stitch down using a serpentine zig zag or other decorative stitch. The 5 hole cording foot is fitted to our machines with 7mm feed width.
enlarge image SA158 7 Hole Cording Foot (up to 7mm)
Used for embellishing with 1-7 narrow cords. Simply thread your cords through the holes and stitch down using a serpentine zig zag or other decorative stitch. The 7 hole cording foot is fitted to our machines with 7mm feed width. Be sure that you check that this foot is usable with your machine.
enlarge image SA160 Stitch Guide Foot
Stitch guide foot has a flange to the right of the foot with measurement markings to use as a fabric guide. This foot is a very helpful guide for use in sewing both utility and embellishing projects.
enlarge image SA161 Adjustable Zipper & Piping Foot
Similar to the “I” foot that is included in many of our machines This foot offers more complete adjustability. The foot is adjustable to the distance that the zipper is from the needle, not just the needle position. Because of it's adjustability it is also often used in many home decoration projects such as sewing piping and other trims with a seam allowance tape making this foot a must for the serious seamstress. Screw on foot - requires low shank adaptor on sewing/embroidery model machines.
enlarge image SA164 Picot Foot (7mm)
Picot foot This foot looks similar to the narrow hemmer feet, but is designed to create a shell-look edge on lightweight fabrics. The groove under the foot is thinner and deeper than the narrow hemmer feet for creating a roll at the fabric edge as the machine feeds.
enlarge image SA167 Straight Stitch Foot
Straight Stitch Foot for PC, PS, NX, ULT, CS, SE270D, NV500D The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch. Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area. ALWAYS USE THE CENTERED NEEDLE POSITION!!!
enlarge image SA176 Zig Zag Foot with Ankle
The zig zag foot with ankle set has a snap on foot for sewing over rises at the beginning of or in the body of your fabric. Simply tilt the foot and pull the button to set the foot. When a rise is encountered, the foot automatically realeases on it's downward slope. No more getting stuck at a rise or uneven stitches on the down side! This is also a great item to have on hand as a replacement for a lost or damaged ankle.
enlarge image SA177 Side Cutter
With our newly redesigned side cutter attachment, beautifully finished seams are just a foot away. The new side cutter attachment, SA177, allows you to use even the wider over-casting stitches on your machine and creates the perfectly cut edge of a serger.
enlarge image SA179 7 Groove Pintuck Foot for the ULT, NX, Innov-ís series.
The pin tuck foot, in combination with a twin needle, helps you to make perfect pin tucks as well as to sew corded pin tucks on shirts, blouses and many home decorating projects. Grooves on the underside of the foot guide along a previous pintuck line to easily sew parallel lines of pintucking. This new version of our pin tuck foot, comes complete with with a set of 2 bobbin covers with cord guide for correct fitment to NX, Innovis or Pacesetter lines of machines.
enlarge image SA184 Edge Joining Foot
The SA184 Edge Joining Foot is perfect for precise and easy joining of fabrics, even sheers and difficult fabrics. Use this foot for lining up and sewing two fabrics together to create the classic Fagoting technique or can be used to line up and sew edgings such as lace to the edge of another fabric. Great for creating garment, home decorating as well as many heirloom finishes.
enlarge image SA185 1/4" Piecing Foot with Guide
The SA185 1/4" Piecing Foot with Guide creates perfect quilt and patchwork piecing with 1/4 inch seam allowance. Accomplishes beautiful long strip piecing.
enlarge image SA186 Metal Open-toe Foot
This snap on Open-toe foot provides clear visibility when creating decorative and satine stitches while securely setting on the feed dogs to provide stitches consistent in length and shape.
 Bobbins & Cassettes
enlarge image SA156 Bobbin (10 Pack)
SA156 Bobbins are 7/16" depth, high quality clear plastic and are for use in many Brother sewing and embroidery machines. (10 pack). Please check your manual to verify which bobbin style is right for your machine.
|
